*Denotes Cementitious & Ploymer Modified
Duracrete II is a medium gray, very rapid setting, cementitious repair mortar that is designed to be used in horizontal applications from ½” up to full-depth when extended.
View ProductDuracrete II FT is a medium gray, very rapid setting, cementitious repair mortar that is designed to be used in horizontal applications from ½” up to full-depth when extended.
View ProductDuracrete II AG is a fast setting, non-staining, non-metallic and very rapid hardening cement based repair mortar with aggregate included.
View ProductHiCap is a line of quick setting, cementitious patching and finishing compounds that are designed to be highly carvable.
View ProductHiCap FT is a medium gray, quick setting, polymer-modified, patching and finishing compound that is designed to be highly carvable.
View ProductPatchwell VO is winter optimized to be resistant to the hazards of freeze-thaw cycling, deicing chemicals, and saltwater environments.
View ProductPipeWipe is a ready to use cement based filler coat to produce a smooth or a "sack rubbed" finish to fill small voids, blemishes and honeycombs on precast concrete, formed concrete, stucco, cement plaster, and other properly prepared structurally sound concrete surfaces.
View ProductDuracrete II VOFT is a medium gray, rapid setting, polymer modified repair mortar that is designed to be used in both vertical and overhead applications from ½” up to 4” deep in a single lift.
View ProductSurePlug Series is a line of fast setting, non-shrinking, hydraulic cement compounds that are formulated to stop leaks in all types of concrete or masonry surfaces; and is particularly designed to instantly stop the flow of running water.
View ProductSurePoxy HM Gel is a two-component, moisture insensitive high strength epoxy bonding adhesive designed specifically for multiple uses.
View ProductSurePoxy LM Gel is a two-component, 100% solids, moisture insensitive, high viscosity and low modulus epoxy bonding adhesive.
View ProductSurePoxy VLM Gel is a two-component, moisture insensitive, 100% solids, very low modulus, epoxy bonding adhesive that is chemically enhanced for greater flexibility to create significantly greater resistance to thermal changes.
View ProductSureBond is a high performance, low viscosity emulsion of high molecular weight acrylic latex bonding agent.
View ProductSureWeld is a ready-to-use, re-wettable, water-based pure polyvinyl acetate bonding agent.
View ProductSurePoxy 110 is a two-component, moisture insensitive high strength epoxy bonding adhesive and binder designed specifically for multiple uses.
View ProductSurePoxy HM is a two-component, moisture insensitive high strength epoxy bonding adhesive and binder with many uses.
View ProductSurePoxy HM Class B is a high modulus, 100% solids, two-component, moisture-insensitive, epoxy resin system.
View ProductSurePoxy HM EPL is a two-component, moisture insensitive, 100% solids and high strength epoxy bonding agent with a unique extended pot life of 15 hours (at 72°F).
View ProductSurePoxy LM is a two-component, moisture insensitive, low modulus epoxy bonding adhesive and binder with many uses.
View ProductSurePoxy LM Gel is a two-component, 100% solids, moisture insensitive, high viscosity and low modulus epoxy bonding adhesive.
View ProductSurePoxy Mortar is a factory proportioned, low modulus, epoxy mortar kit that comes ready to use in a 5-gallon pail that includes a can of the A Component Resin, a can of the B Component Hardener, both nestled within the special SurePoxy Mortar Aggregate.
View ProductSurePoxy Mortar Aggregate is a washed, oven-dried specially graded aggregate, recommended for use with all SurePoxy and K Pro Series epoxy resin systems to produce epoxy mortars, epoxy grouts, epoxy overlays, and for general skid resistance in epoxy coatings.
View ProductSurePoxy LMLV is a two-component, moisture insensitive, 100% solids, low modulus, epoxy adhesive and binder with multiple uses.
View ProductSurePoxy HMLV is a two-component, moisture insensitive high strength epoxy adhesive and binder designed specifically for multiple uses.
View ProductSurePoxy HMLV, Class B is a two-component, moisture insensitive high strength epoxy adhesive and binder designed specifically for temperatures down to 33° Fahrenheit.
View ProductSurePoxy VLMLV is a two-component, moisture insensitive high strength epoxy adhesive and binder designed specifically for multiple uses.
View ProductSurePoxy HMSLV is ideally suited for concrete crack repair and as a penetrating sealer. SurePoxy HMSLV may be used to repair cracks in concrete through either gravity feeding or injection.
View ProductSurePoxy LMLV is a two-component, moisture insensitive, 100% solids, low modulus, epoxy adhesive and binder with multiple uses.
View ProductSurePoxy 116 is our most rapid-setting, moisture insensitive, high strength epoxy resin system designed for anchoring threaded rod and rebar into concrete, and for buttering cracks prior to injection.
View ProductSurePoxy 117 is our rapid-setting, moisture insensitive, high strength epoxy resin system designed for anchoring threaded rod and rebar into concrete, and for buttering cracks prior to injection.
View ProductSurePoxy DBA is our slowest-setting, moisture insensitive, high strength epoxy resin system designed for anchoring threaded rod and rebar into concrete, and for buttering cracks prior to injection.
View ProductSurePoxy VLM is a two-component, 100% solids, moisture insensitive and medium viscosity epoxy resin system.
View ProductSurePoxy VLM, Class B is a two-component, 100% solids, moisture insensitive and medium viscosity epoxy resin system.
View ProductSureGrout is a high quality grout for use where consistent quality and positive expansion are critical for proper filling of a void.
View ProductSureGrout 106 is a non-shrink, air-entrained, cementitious grout for use where consistent quality and positive expansion are required.
View ProductSureGrout Fluid 5000 is a rapid strength gaining, non-shrink grout for use where consistent quality, positive expansion, and compressive strengths higher than 5,000 psi. at the fluid mix ratio in just twenty-four hours is required.
View ProductSureGrout HiFlow is a non-shrink, cementitious grout for use where high fluidity, consistent quality and positive expansion are required.
View ProductSureGrout UW is an underwater grade, non-shrink cementitious grout for use where consistent quality and positive expansion are required.
View ProductSureGrout MET is a non-shrink, metallic aggregate grout for use where greater abrasion resistance, impact resistance, consistent quality and positive expansion are required.
View ProductK Pro HP Grout Epoxy is a two-component, moisture insensitive, low viscosity, deep-pour, high strength epoxy binder.
View ProductK Pro HP Grout Aggregate is a washed, oven-dried specially graded aggregate, recommended for use with all SurePoxy and K Pro Series epoxy resin systems to produce epoxy grouts.
View ProductSurePoxy HMLV is a two-component, moisture insensitive high strength epoxy adhesive and binder designed specifically for multiple uses.
View ProductSurePoxy HMLV, Class B is a two-component, moisture insensitive high strength epoxy adhesive and binder designed specifically for temperatures down to 33° Fahrenheit.
View ProductSurePoxy LMLV is a two-component, moisture insensitive, 100% solids, low modulus, epoxy adhesive and binder with multiple uses.
View ProductSurePoxy VLMLV is a two-component, moisture insensitive high strength epoxy adhesive and binder designed specifically for multiple uses.
View Product